Sunday, February 15, 2015

Making a Wrap Bracelet with Lampwork Beads

Here you go! I've made a few wrap bracelets lately and wanted to share my easy as pie method. It's adjustable and does not require the wearer to tie it on. One thing I have learned is that the hole size of the beads matter immensely. A 3/32 hole is not really large enough for one of these silk ribbons to fit through. If it goes through it's great because it is a nice snug fit and won't go off in its own direction later. But it will not always fit on the ribbon. You're on your own with that!

A focal bead that fits snugly on the ribbon is a good start. Put it on the ribbon and center. This is the hard part! You might need to use a wire to push the cord through, and it might even help to put one of the end threads through the hole at a time.



Then you'll need a couple of beads with a little larger holes for the end of the cords. These were built on a 4 mm mandrel and fit just right.







Put a bead on each end of the cord.
Put other end of the cord through each of those beads going in the opposite direction form the first cord. You now have an enclosed loop.





Tie end of each thread end and cauterize with lighter.








 Tie a knot in each end of the ribbon.
 To wear- wrap around wrist four times, pull tight (you may need to use your teeth for this!), then pull small beads to the ends of the ribbon. For me the small beads end up at the bottom of my wrist- this will, of course depend on your wrist size and how you like your bracelet to lie. Finito!
 
 

Thursday, February 5, 2015

Spindles and removable glass whorls

Well, as some of you may have seen, I am now making glass whorls for spinners to fit on some lovely wooden spindles made by my friend Lois at missingspindle. Lois has been studying ancient spindle and whorl use for a very long time and has recently decided to go public with all of her wonderful knowledge. She has been making some quirky movies and writing some amazing blogs about how and why we are making this type of tool. The whorls I make are just one small part of her mission to educate and slowly take over the spinning world with medieval designed spinning tools.

Everyone should read her hilarious blog about testing out fresh and dried fruits and vegetables as whorls. I humbly believe that glass works a bit better. But then again I may be prejudiced! Her etsy shop is here, and you can watch her videos on the missingspindle channel on youtube.

The newest venture we've been working on is spindles with multiple removable whorls. This example has three whorls- getting ahead of myself a bit as we are only at the double whorl stage as yet. But one of my adventurous customers has already asked me to work out a triple scheme for her. Spinners are such a fun bunch!

Saturday, November 15, 2014

Me on the radio! Lampwork Glass Beads on Marketplace Weekend...

Woohoo. This is a first for me- I was interviewed for the radio show Marketplace Weekend. It's just a small piece of the whole show about 'profiting on passion'. OK, so I sound a little silly. But still~ it's me on a national radio show! They said it couldn't be done.... You can listen here~

http://www.marketplace.org/topics/your-money/your-wallet-profiting-passion

This photo has absolutely nothing to do with the show~ but bending beads is my current obsession!

Tuesday, June 17, 2014

Spindles and Whorls~ Medieval Style!

Lights, camera and action! It's finally time for my new glass whorls to enter my etsy shop. These have been paired with lovely hand turned and hand carved recycled wooden spindles for a wonderfully modern Medieval spinning experience. Say What???!!! Well, let me 'splain a bit.

First of all, let me say that, this being a cooperative effort, things will be moving a wee bit more slowly than my usual frantic glass making mania. Right now, I make the whorls, we meet and measure and Lois makes a matching stick. But soon we will have our standards down to make it all go oh so much more smoothly. Added to that is that these glass whorls are big and they take a lot of time and energy to make. Though that's unlikely to change, I'm hoping to adjust to them over time.

The wooden spindle and whorl are not glued together- they are two separate pieces which fit together snugly. A small o-ring or rubber hairband is included to help keep the whorl from falling off and whirling across the floor.

Watch these sweet little youtube videos to see some of these spindles at work and some instructions for use. 



Now, down to brass tacks- how do these things work? A bulleted list will help, I think.
* These glass whorls are best for light or lace weight spinning. For making heavier weight yarn, add a bit more whorl weight. More glass or one of missingspindle's pottery whorls should do it!
* If adding extra weight, be sure the whorls will nest properly. Questions? Just ask the shop owner!
* Because the whorls are handmade, they may be a little unbalanced. They have all been tested with the specific stick they are sold with, but will need to be adjusted on the spindle until the place of best balance is found.
* Make sure the whorl is perpendicular on the spindle. Push up tightly and test spin. Move around slightly on the stick until you find the place of best balance (the 'sweet spot').
* Push the o-ring or hairband up below the whorl to keep it right where you want it.
* Load leader on spindle by using a lark's head knot just above the glass whorl (at the bottom of the belly).
* Wind up and around the spindle several times, with several small winds near the top.
* Top off with one or two half hitches around the indented neck to hold the leader in place.
* Spin yarn!
* When loading spun yarn on the stick, center it over the widened belly, winding up and down in a spiral.

What fun for a little different hand spinning experience!