Murrini!

My murrini is on the purple, Kaz's on the blue and orange

Oh my! I've gone on a murrini making binge. I bought a few from Kaz Baildon in England, but couldn't wait for them to arrive, so I got a rod nipper and began making a few of my own. Still working on making them turn out as I have envisioned them- right now, some come out quite nice and others, well, not so much. But, because I'm making them, I must also learn to use them. I have resisted this whole silly thing for more than 15 years! Now? Well, I may be getting just a wee bit addicted....


If you are not a bead maker or glass afficianado, you may wonder what the heck a murrini is. For your edification, I must, as usual, point you to the wiki about such things. One builds a tube shaped blob of glass using a lot of different colors, pulls it into a rod and then cuts thin bits off of it. These cross section pieces have sweet designs in them that get placed onto the hot bead. They can look like just about anything- the classic use is in a millefiori (thousand flowers) design, where piles of flowery-looking murrini are placed all over a piece. But a murrini doesn't have to look like a flower- it can be a fish, a heart, a star, your initials- anything, really!

So now on to the small touch of something I think I've learned. First, in the purple fish pictured- the murrini at the bottom is encased, while the ones at the top of the bead are placed on the surface and melted in. The encased murrini was an extremely thin slice which I simply laid on my marver and picked up with the hot bead. Because it was so thin, there was no worry about it shocking and breaking. And it was easy to melt smooth and encase. A nice use of those bits that are simply too thin to pick up, and it really shows off the design nicely.



Another cool thing is the 'barnacle effect' as seen on the tree bead. As best I can remember, I did not melt these murrini all the way down, but got them about 1/2 way melted in and then  put a blob of clear on top. Not exactly what I was going for- it looks a barnacle or eye-leafed tree, but it's a fairly fun idea that could be used effectively somewhere, I'm sure! Those wee murrini next to the tree are the ones I used on it, and my favorite pull so far- modeled after peacock tail eyes.

If you are interested in learning the art of murrini making, I can highly recommend the October 2013 issue of the Soda Lime Times. I read through all the different instructions there and ended up sort of combining things together. John Rizzi did a particularly nice job with his tut! The magazine also has murrini recipes from a whole bunch of different people. I have not attempted to follow any of those, but it was great to see see what folks do!

I use just regular tweezers ('cause that's what I've got!), but I have heard that it is helpful to have either tungsten tipped tweezers (so they won't stick) or some pipe and tube or universal cylinder tweezers from Micro-Mark. I have not tried these, but folks were pretty excited about them on facebook.

What's in a Name?

Just a short little bit of something- how about naming all those lampwork glass beads I make? Well, I don't normally name individual beads unless something just hits me. I figure the person who wants to wear the wee talisman will want to name it her (or sometimes his) self. But I can name a series or style of bead so- here goes.

A 'portal' pendant has a hole through the center. It could be a door to new ideas, or a new chapter in your life. I test marketed the name with my all knowing daughter who liked it because there are usually swirly twirly bits about, giving it that mystical feel. Sometimes these also have a bit of a wing along one side.

A 'mandala' bead has eight points- for the four directions and then one bump between those. I often find 'The Circle Game' by Joni Mitchell going through my head when I make these! If I make one of these beads with 7 or 9 points, they become 'kaleidoscope' beads. Sometimes they end up star shaped as well- when I just don't feel like waiting for everything to melt in!

'Glitterati' fish have a shiny center and shiny bits of green aventurine on the outside- for folks who just have to have a bit of bling !

"Cephalopod-esque' beads have a bit of a tentacle. They are not really meant to be any kind of animal, but are such fun for me to make, I just can't resist!

'Chrysalis' beads are stylized beads based on cocoons or chrysalides. Folks seem to like the rebirth and moving to a new phase in life implications in these. They are interesting to make~ often I feel hard to get quite 'right.' I don't make them very often these days.

Glass Fish Inspirations

Lampwork glass fish are one of my favorite kinds of beads to make. They are a lot of fun to wear all by themselves as pendants. Most folks who purchase them use them in this way, so I bail them and put them on cords before I ship them out.
I find you can do almost anything with a fish body and it looks pretty nice. Last week, I decided to try making a couple of more realistic fish. The first thing I did was to search the internet for photos of fish that looked interesting to me. I was looking for bright colors, colors I might not normally think to mix together in a bead, and interesting patterns. One of the fish that interested me was a clown trigger fish. I changed up the color just a little bit- adding a little more green than was strictly called for, and came up with a sweet little fish that was quite different from others I'd made. I used Thompson glass enamels for some of the color- I like the way it works when I want to imitate a natural pattern.
The next challenge I set myself was to use up some of the glass twistie scraps I had lying around. This one is purely a fantasy fish, with a base of white and silver and a lot of pastel colors that meshed nicely.
The last fish I'll be showing today is what I'm calling a sari (or saree) fish. It is an idea I'm still working out, where one pattern is pulled across a different base pattern, just as a sari is draped around a body. This red one is my favorite in that design.